ASCAN-8(M)

The diagnostic tool-scanner ASCAN-8(M) is designed for diagnostics of the VAZ, GAZ, UAZ, IZH, and Daewoo IC engines ECUs and VAG and OBD II (K-line) vehicles.
This tool can be used for maintenance and repair of vehicles by service stations technical personnel, vehicle owners, as well as at production sites that produce vehicles with control systems.

TOOL KEY FEATURES

  • Bright graphical display with 128×64 dots resolution and adjustable contrast
  • Ergonomic sealed housing made of durable plastic
  • Highly sensitive and responsive membrane keypad with oil and gasoline resistant coating and long service life
  • A wide range of operating temperatures from -10°C to 50°C
  • A high-performance 16-bit microcontroller
  • 512 (1024) KB built-in flash memory
  • Software updates can be installed by the user via the Internet, no need to contact official dealers.
  • Extensible set of program modules — up to 15 modules (for ASCAN-8M) can be registered in the tool, with unlimited number of modules that can be stored on your computer
  • Advanced built-in user assistance system
  • Built-in games and calculator

 

Diagnostic scanner-tool ASCAN-8M can perform diagnostics of the following ECUs

  • MIKAS 5.4, MIKAS 7.1, MIKAS 7.2, SOATE, VS5.6, VS8 — GAZ, UAZ vehicles (DGM5 module)
  • MIKAS 11 ET, CR, Euro3, M73 — GAZ, UAZ vehicles (DGM11 module)
  • JANUARY-4 — VAZ vehicles (DVJ4 module)
  • GM ISFI-2S, EFI-4 (ITMS) — VAZ vehicles (DVGM module)
  • JANUARY-5.1, JANUARY-5.1.1, JANUARY 7.2, VS 5.1, BOSCH 1.5.4, BOSCH 1.5.4N — VAZ vehicles (DVBA module)
  • BOSCH Motronic MP7.0 (EURO2, EURO3) — VAZ, Chevrolet Niva vehicles (DVB7 module)
  • BOSCH 7.9.7 — VAZ vehicles (DVB797 module)
  • M73 — VAZ vehicles (DM73 module)
  • MIKAS 7.6 — Slavuta, Sens, IZH vehicles (DZL module)
  • MIKAS 10, MIKAS 11- GAZ vehicles (DGM10 module)
  • MIKAS 10.3 — GAZ, UAZ, Slavuta, Sens vehicles (DAM10 module)
  • GAZ-560 (STEYR) — GAZ vehicles (DGS module)
  • DAEWOO (GM Multec, ITMS, IEFI) — Daewoo Espero, PRINCE, Nexia Cielo, Nexia GLX, Nexia UZ, Leman Racer, Lanos, Nubira, Nubira 2, Leganza, Magnus, Rezzo vehicles (DDWO module)
  • VAG — AUDI, Skoda, Volkswagen, Seat vehicles (DVAG module)
  • OBD II/EOBD — vehicles equipped with self-diagnostics system OBD II/EOBD (DOBD module)
  • ABS UAZ — ABS diagnostics of UAZ vehicles

ASKAN-8 (M) diagnostic tester allows you to:

  • Read the ECU parameters as both output sensor signals and normalized signals
  • Display parameters curves in real-time
  • Write ECU parameters to tester’s memory with 0.2 second increments and then display them in the digital and graphic form
  • Read both current and stored in memory failure codes from ECU
  • Erase failure codes from ECU memory
  • Read data stored in ECU memory containing ECU package information and vehicle and ECU identification information
  • Control actuating mechanisms
  • Perform vehicle dynamic tests
  • Print information stored in the tester memory about current failures and parameters of the diagnosed vehicle via PC on printer

The device supply package includes:

1. ASKAN-8 Diagnostic Tester
2. Connection cable for VAZ vehicle
3. Connection cable for GAZ and UAZ vehicles
4. Passport
5. Diagnostic modules for the following ECUs: MIKAS 5.4, MIKAS 7.1, MIKAS 7.2, SOATE, VS 5.6, JANUARY 4, GM ISFI 2S, EFI 4 (ITMS), JANUARY 5.1, JANUARY 5.1.1, VS 5.1, BOSCH 1.5.4, BOSCH 1.5.4N, BOSCH MP7.0 (EURO2, EURO3), BOSCH 7.9.7, MIKAS 10, MIKAS 11.

Optional equipment:

  1. Module for MIKAS 7.6, MIKAS 10.3 engine control systems diagnostics;
  2. Module for GAZ 560 (STEYR) engine control systems diagnostics;
  3. Module for DAEWOO (GM Multec, ITMS, IEFI) engine control systems diagnostics;
  4. OBD II/EOBD Module;
  5. VAG Module
  6. ABS UAZ Module
  7. Cable for connection to the OBD II diagnostic block;
  8. Cable for connection to the VDO STEYR diagnostic block;
  9. PC connection adapter